Pumps

KMT

Waterjet – High-PressureWaterjet Pump

H.P. TECHNOLOGY 4.130 Bar = 60.000 PSI STRAMLINE™ SLV-V PUMP 30 – 50

Model Power Water Consumption Orifice Size N. Heads
30 30 HP 0,7 gal/min – 2,8 lt/min 0,010′ – 0,25 mm 1
50 50 HP 0,9 gal/min – 3,8 lt/min 0,014” – 0,35 mm 1 – 2
KMT STREAMLINETM SLV-V High-Pressure Waterjet Pump System with Extended life single intensifier
  • Ceramic Plungers
  • Dual Pressure Control
  • Working Pressure: 4.000 Bar = 58.000 PSI
  • Design Pressure: 4.130 Bar = 60.000 PSI
  • Attenuator

ULTRA H.P. TECHNOLOGY 6.200 Bar = 90.000 PSI STREAMLINE™ PRO PUMP 60 – 125

Model Power Water Consumption Orifice Size N. Heads
60 PRO 60 HP 0,61 gal/min – 2,5 lt/min 0,010” – 0,25 mm 1 – 2
125 PRO 125 HP 1,37 gal/min – 5,5 lt/min 0,014” – 0,35 mm 1 – 2 – 4
ADVANTAGES
  • ncrease from 3 to 4 Mach Speed the supersonic Jet
  • Increase cutting power density by 83%
  • Possibility to cut materials with pure water only
    • 1/4″ = 6 mm aluminum
    • 1/8″ = 3 mm titanium
  • Increase Max. cutting thickness
    • Titanium up to 10″ = 250 mm
    • Steel up to 12″ = 300 mm
    • Aluminum up to 16″ = 400 mm
  • Increase cutting speeds: up to 250 % more
  • with identical abrasive mass flow rate
  • Reduced abrasive consumption: 30 % less
  • Reduction of groove zone area and increase of cutting quality up to 3 times better with identical cutting speed (less roughness degree)
  • Cutting harder material such as ceramics
KMt_streamline-pro
  • Electronic Pressure Control
  • Working Pressure: 6.200 Bar = 90.000 PSI
  • Design Pressure: 6.600 Bar = 96.000 PSI
  • Attenuator Volume: 2 lt = 1/2 gal